Highland Reeds Bagpipe Moisture Control

	The Moisture Control Drone Systems for the Highland Bagpipe New revised Moisture Control System MCS2 with flexible connector for drone stockand screw adjustable quick stop drone valve. Additionally the drone connector has been strengthened. All these new components are available to purchase separately and are fully interchangeable with the original MCS The flexi-connector fits onto the bottom of your drone stock and the MCS2 attaches to this. The Moisture Control System (MCS) has been designed and developed with you, the piper, in mind. It offers the following benefits: * KEEPS REEDS DIRIER SO YOU CAN PLAY LONGER * NO TONAL CHANGE * CONSITENCY OF AIR PRESSURE * REMOVABLE QUICK STOP DRONE VALVE * EASY TO INSTALL AND MAINTAIN * NON-BULKY, LIGHTWEIGHT SYSTEM "Taking only seconds to remove and reinstall before and after each practice session or performance, this hassle free moisture control system has greatly increased my playing duration with no noticeable change in tonal quality or volume... definitely the lowest maintenance and steadiest bagpipe I've ever had!" - Robert Watt QUICK STOP DRONE VALVE The Quick Stop drone valve has been developed as an integral part of your MCS to assist with clean starts and cut-offs. You can adjust the tension of the valve through the new screw feature. "Since I've started using the Moisture Control System I've had no trouble with moisture on my reeds. The cartridges have proved easy to remove and replace and the whole system is much lighter than others I have tried... a bonus when playing long shows. All in all the best Moisture Control System going." - Aaron Shaw, Wicked Tinkers CONNECTOR A tight fit of the MCS is essential to optimise the benefits of the system and the flexi-connector provides this. You can, if desired, insert the connectors directly into the drone stock. To do this, apply black hemp to the connectors and then insert into drone stocks. CARTRIDGE The gel filled cartridge section can now be fitted to the connector. The effective playing time of the cartridge will vary according to how wet a blower you are. Click Here for MCSTestimonials Price: £35.00(Excluding: VAT at 17.5%)
	Quantity:

	Chanter Moisture Control System The Chanter Moisture Control System (CMCS) has been designed to help reduce moisture from your pipe bag reaching your chanter reed. The CMCS complements the drone Moisture Control System and offer the following benefits: KEEPS CHANTER REED DRIER SO YOU CAN PLAY FOR LONGER NON-BULKY, LIGHTWEIGHT SYSTEM EASY TO INSTALL AND MAINTAIN System Description - Air is taken through the gel filled cartridge section, on through the flexi-tube and connects to the chanter stock. FOR EXTENDED PLAYING TIME COMBINE THE CHANTER MOISTURE CONTROL SYSTEM WITH THE DRONE MOISTURE CONTROL SYSTEM AND PLAY UNTIL YOU GIVE IN RATHER THAN YOUR BAGPIPE! Price: £15.00(Excluding: VAT at 17.5%)
	Quantity:

	Set of Quick Stop Dronve Valves (3) The tension on the quick stop drone valve is now screw adjustable giving greater accuracy and once properly installed to suit your blowing strength the Highland Reeds Quick Stop Drone Valves should ensure that you strike your pipe in without difficulty, provide a steady flow of air to your drone reeds and close tightly when pressure is released to ensure a clean 'cut-off.' It is possible to purchase the cartridges separately to upgrade to full moisture control system. Price: £15.00(Excluding: VAT at 17.5%)
	Quantity:

	Set of Flexible Connectors (3) Set of Flexible Connectors for drone stocks. Price: £5.00(Excluding: VAT at 17.5%)
	Quantity:

	Replacement Cartridges (3) Set of three drone cartridges supplied with elbow joints and gells. Price: £20.00(Excluding: VAT at 17.5%)
	Quantity:

	Spare Gels Spare silica gels - enough for 3 cartridges. Price: £5.00(Excluding: VAT at 17.5%)
	Quantity:

	Bottle Moisture Trap Fits into the bottom of the blow stock. Air passes through plastic tube and through a bottle containing an absorbant material before being introduced into the bag. Price: £15.00(Excluding: VAT at 17.5%)
	Quantity:

	Moisture Control Sleeve Fits into the bottom of your blow stock. Air passes through the breathable sleeve containing an absorbant material. A spring within the sleeve ensures there is no restriction due to decrease of cross sectional area. Price: £15.00(Excluding: VAT at 17.5%)
	Quantity: